Korean research team invents new method for synthesizing organic materials in 0.1 seconds

December 01, 2020



South Korea’s “East Asia Science and Technology” released a news report that the research team at the Ulsan Institute of Science and Technology, through the heating of solid organic matter, triggered an explosive reaction and produced a three-dimensional porous organic structure in 0.1 seconds. The research was published online November 27 in the journal Nature Communications.
    
The research team stumbled upon the process of synthesizing three-dimensional carbon materials. When the crystalline solid organic material was heated, a sudden rapid temperature rise occurred between 100-150 degrees, and caused a violent chemical reaction. A three-dimensional porous material was formed within 0.1 second. The team discovered the principle of the formation of porous crystals.
    
The research team pointed out that the chemical reaction in the solid state does not require subsequent treatment, is very environmentally friendly, and can obtain high-purity reaction crystals. This method has many advantages compared with the chemical reaction in gas and liquid state.
    
The results of the study indicate that scientists have found a new method for the synthesis of organic materials that can be widely used, with high academic value and application value.


UPE plastic,full name UHMWPE (ultra high molecular weight polyethylene) is a kind of thermoplastic engineering plastic with excellent properties of linear structure, with a molecular weight of more than 1.5 million.mainly have  ESD UPE SHEET,CONDUCTIVE UPE.

Small density, good wear resistance, self - lubricity, impact resistance, corrosion resistance and so on.

 

Advantages:

1. Average molecular weight about 5,000,000 to 9,000,000;

2.The best abrasive assistance of all plastics , which 4 times higher than that of nylon 66 or teflon and 6 times higher than that of carbon steel;

3.Extremely high impact stength ,which is twice as high as PC ,5 times as high as ABS,it also retaines high toughness at liquid nitrogen temperature (-196'C);

4.Low friction coefficient ,lubricity is equal to that of Teflon ;

5.The best impact energy absorption value of all plastics ,with very good sound reduction effect ;

6.High chemical stability ,capable of resisting various types of corrosion and organic media within certain temperature and concentration range;

7.Strong adhensive resistance which is only second to Teflon;

8.UHMW-PE Plastic is safe , healthful and non-toxic and be can used in contact with food and drugs ;

9.Low density than any other thermoplastic ;

10.Excellent electrical insulation and static resistance ,good resistance to high energy radiation;

11.Moderate mechanical strength,stiffness and creep-resistant property'

12.Outstanding machining property ,very low water absorption .


 

 

Deficiencies:

Compared with other engineering plasticsUHMW-PE Plastic is resistant to heat resistance, stiffness and hardness, but can be improved by means of "filling" and "crosslinking".

From the point ofheat resistance, the melting point of UHMW-PE Plastic is approximately the same (136 ℃) and ordinary polyethylene, but because of its big molecular weight, melt viscosity high, so the processing difficulty is big.

 

Applications:

Papermaking industry : suction box boards ,scrapper,molding plate ,beating ,gear .

Mining industry : charging barrel ,abrasive and adhensive -resistant back lining for warehouses.

Chemical industry : acid pump ,fliter plate , worm gear ,bearing .

Food industry :packing machinery parts ,bottle guide ,screw .wear plate ,slide away ,stud weld ,roller and other transmission parts.

Tenxile industry : buffer board

Food processing industry : chopping block ,refrigerating plant

Wharf:anti-collision board

 

Specification: the thickness of UHMW-PE Plastic sheet material can be produced from 0.3mm to 1.9mm, the normal width is 600mm, the width can exceed 1200mm, and the length is not limited.
The thickness of plate can be produced from 2mm to 180mm, the usual specification of 2-10mm is 600mm* 1200mm, and the commonly used specification of 10-180mm is 1200*3080mm. UHMW-PE Plastic can also be customized according to requirements, and the width cannot exceed 1200mm, and the length is not limited.

Color: Black and white, can also be made another color, and the color order is 500KG.


Modified varieties: UHMW-PE Plastic can be added to the Glass Fiber, copper powder, and molybdenum disulfide enhancement plate according to customer's requirements.
Add antistatic agent to the permanent plate, the volume resistance value of 10 to the 6 to 9 power.
Add flame retardant to the flame retardant board from UL 94v-0 to HB combustion grade, and other modification requirements are required to customize various additional properties according to the actual use of the customer.

Product certification: most environmental certification reports and safety reports forraw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.

 

UHMW-PE Plastic Rod

Uhmwpe Plastic Rod,Hdpe Plastic Rod,White Pe Plastic Rod,White Hdpe Plastic Rod

Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com