Imported bearing protection skills: When to change oil and how much oil should be changed

December 25, 2020

Home>Bearing knowledge>Imported bearing protection skills: When to change oil and how much oil should be changed
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Imported bearing protection skills: When to change oil and how much oil should be changed

Source: China Bearing Network Time: 2018-02-12

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The two major problems related to the protection of imported bearings are: when to change the oil and how much oil should be changed. If the oil is too little, the imported bearings will be discarded early. If the oil is too much, the imported bearings will be in trouble or long time. Damage to the power coil and coiled wire.
Traditionally, the sleek solution is based on time. The equipment supplier generally formulates a sleek solution based on the operating time. Moreover, the equipment supplier often participates in the coaching of the amount of smooth oil during their repair program. Said; short-term replacement of smooth oil right or wrong often seen work; and often increased more smooth grease. For example; demand workers replace the smooth oil every two to three weeks; each time add an ounce of smooth grease. These claims from the beginning Inciting them to be built on some uninformed elements that have no practical meaning.
There is a simple condition for the smooth moment distance: the proper operation of the equipment is carried out under the condition that the imported bearings are not stopped due to boring and collapsing. This is a fixed prevention concept. However, it is necessary to insist on smooth hunger and a lot of excessive Balance between smoothness.
Recommend to friends comments close window

Bearing related knowledge
Rolling bearings using smooth grease should follow the guidelines "bearing view and protection" approach to solid self-smooth bearing analysis how to improve INA bearing accuracy?
Bearing ring super finishing process


This article links to http://
Please indicate the bearing network http://

Previous: Painting Skills: Reasons for the Corrosion of Imported Bearings and Solutions Next: Ceramic Bearings Illumination

The salvage spear is an internal fishing tool, which can salvage drill pipe, tubing, sleeve milling pipe, liner, packer, water distributor, spawner, etc. Work or use with other tools (such as jars, flippers).

Salvage spear
(1) Uses.
The salvage spear is an internal fishing tool, which can salvage drill pipe, tubing, sleeve milling pipe, liner, packer, water distributor, spawner, etc. Work or use with other tools (such as jars, flippers).
(2) Classification
Salvage spears are divided into reverse type and non-reverse type according to the use; according to the characteristics of use are divided into retreat type and non-retractable type; according to the structure of the salvage element can be divided into threaded buckle type and slip type

Novel Spear

Novel Spear,Machinery Tools Supplies,Mechanical Equipment Drilling,Tools for Drilling

Puyang Junhong Rubber Co., Ltd. , https://www.pyjhxs.com