Load capacity of a spherical bearing with a seat

October 09, 2019

Home>Bearing knowledge>Loading capacity of spherical bearings with seats
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Load capacity of a spherical bearing with a seat

Source: China Bearing Network Time: 2014-07-28

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
The load of the outer spherical ball bearing can be the same as that of the deep groove ball bearing; the equivalent load is calculated in the same way as the deep groove ball bearing.
The axial load can depend on the degree of inner ring and bearing consolidation; usually it should not be greater than 20% of its additional load; when the axial load is large; the consolidation equipment should be added on the shaft; such as the shoulder.
Recommend to friends comments close window

Bearing related knowledge
Commonly used rolling mill bearing equipment type Daily bearing net bearing spot introduction Bearing residual magnetism how does it happen?
The "correct application method and the cause of the problem" of the rolling bearing


This article links to http://
Please indicate the bearing network http://

Previous:Dimensions of sub-components and parts Next:How to ensure reliable bearing operation

Super 100 – a series of Macroporous Adsorbent Resin designed for the polishing purification. These resins have optimized pore structure, excellent chemical and pH stability. They are made of polystyrene, with the advantages of high mechanical strength, easy column packing and high resolution. These resins are able to maintain high capacity of target products (e.g insulin) after soaked in 1mol/L NaOH. As the result, it can be considered to replace C18 silica gel in some cases.

50-150 Micron Macroporous Adsorbent Resin

120 Micron Macroporous Adsorbent Resin,Macropore Adsorptive Resin,Favourable Macroporous Absorbent Resin,Alternative For C18 Silica

Nanjing Genshine Bio-technology Co., Ltd , http://www.genshine-bio.com